PRODUCT INFORMATION

DUPLEX OIL STRAINER (HS TYPE)
DUPLEX OIL STRAINER
HS
 
A product based on JIS F 7208 with diameters up to 250A. The large element surface area allows for it to be used for highly viscous oils and high precision filtering.
Normally used for oil straining, but it can also have the inner surface lined with rubber allowing it to be used for water, chemicals and other substances.
We also offer an HS type with a flange type cover for high pressure (HR type) and a type where the inlet and outlet flanges are set at the same height for high pressure (ER type).
A compact switching type (HN Type) newly established in fiscal 2001 by JIS F 7208, with diameters from 25A to 40A.
CAM LEVER HANDLE DUPLEX OIL STRAINER (DH TYPE)
CAM LEVER HANDLE DUPLEX OIL STRAINER
DH
 
Uses the HS type oil strainer main body as-is, with a strainer which uses a cam lever handle in the cock plug switching section. Available in nominal diameters from 50A to 125A.
DUPLEX OIL STRAINER (UH TYPE)
DUPLEX OIL STRAINER
UH
 
This product uses the H type oil strainer main body as a base with the inlet and outlet flanges set in the same direction.
This UH type was created based on customer requests and opinions related to making pipes more compact, space issues on the rear surface, etc.
Can be used in corners and locations where piping space is limited where it is difficult to use the H type oil strainers.
40A and under are direct switching types and 50A and over use cam lever handle types.
DUPLEX WATER STRAINER (DW TYPE)
DUPLEX WATER STRAINER
DW
 
This strainer uses a cam lever on a small form, lightweight flangeless main body, which allows for a large effective area of the element with low reduction of the cock plug section effective filtering area even when elements on both sides are used simultaneously.
The main body material uses an FC base with a suitable amount of chrome which provides the product with superior corrosion resistance.
The product name says "water strainer" but it can also be used for low viscosity oils and other substances.
Available elements are a φ5 mm hole only or a 100 mesh or lower wire mesh.
DUPLEX OIL STRAINER (WS TYPE)
DUPLEX OIL STRAINER (DR TYPE / WR TYPE)
DUPLEX OIL STRAINER
WS
 
These products are based on JIS F 7202 (formerly F 7224), and are a 40A or under, small form, duplex oil strainer (WS type) which uses a cock plug direct switching method, specialized for 5K.  
The cam lever handle duplex oil filter (DR) and duplex oil filter (WR) are 10K specialized strainers with the inlets and outlets in the same direction and can be used in corners and locations where piping space is limited.
SIMPLEX OIL STRAINER (SS TYPE)
SIMPLEX OIL STRAINER
SS
 
A product based on JIS F 7209. The large element surface area allows for it to be used for highly viscous oils and high precision filtering.
We also offer a flange bolt fastened type (SS-FB type) with no cover clamp for 200A and above.
The available forms are a straight S shape from the inlet flange to the outlet, left-curved outlet LA type and right curved outlet LB type.
We also offer a high pressure flange cover type (RS type).
CAN WATER STRAINER (TS TYPE)
CAN WATER STRAINER
TS/T3
 
A JIS F 7121 based product which can be used in a wide range of applications from cooling and pipes for pure water, sewage, seawater, ballast etc. for vessels and cooling water for various equipment and plants on land.
The available forms are a straight S shape from the inlet flange to the outlet, left-curved outlet LA type and right curved outlet LB type.
The inner surface can be coated with modified epoxy and lined with neoprene rubber.
A 3-way can water strainer with 2 inlet flanges and 1 outlet on a cylindrical water strainer base, newly added to our product lineup.
Contributes to a more compact piping layout.
MUD BOX (ML TYPE)
MUD BOX
ML
 
A product based on JIS F 7203. Mainly used in bilge piping for ships.  
In addition to the JIS standard form, we have also produced a small form, lightweight mudbox (MM type) using 125A to 250A nominal diameter Mizuno strainers with 4 filter plates.
Y TYPE STRAINER (MYF TYPE)
Y TYPE STRAINER
MYF
 

Our most popular strainer, a Y type strainer (MYF type) that is small form and lightweight.

Standard element filtering precision is from approximately 16 to 60 mesh.

Use for low mesh, low turbidity liquids.

We also offer a stainless steel MYU type

U TYPE STRAINER (MUF TYPE)
U TYPE STRAINER
MUF
 
The U type strainer has outlets and inlets at the same height which allows for easy piping as a line strainer because it has no attachment legs and in addition the bucket type element allows for easy removal and cleaning. The element capacity is between the simplex and Y types, making this a strainer appropriate for a wide range of uses.
Standard element filtering precision is from approximately 16 to 100 mesh.
SCREWED TYPE SIMPLEX STRAINER (STU TYPE)
SCREWED TYPE SIMPLEX STRAINER
STU
 
The screwed type simplex strainer is designed for 40A and under, and is compact with inlets and outlets at the same height allowing for easier piping, and also has a large surface area ratio element, allowing it to be used for highly viscous oil and other substances.
SCREWED TYPE DUPLEX STRAINER (STW TYPE)
SCREWED TYPE DUPLEX STRAINER
STW
 
The screwed type duplex strainer is design for 40A and under, and is compact with inlets and outlets at the same height allowing for easier piping, and also has a large surface area ratio element, allowing it to be used for highly viscous oil and other substances.
CYLINDRICAL SIGHT GLASS (GC TYPE)
CYLINDRICAL SIGHT GLASS
GC
 
A product based on JIS F 7218. Used to check the flow of the contained liquid through fluoroscopy.
We also offer an methacrylate molding (resin) glass material.
PLATE GLASS TYPE SIGHT GLASS (GP TYPE)
PLATE GLASS TYPE SIGHT GLASS
GP
 
A product based on JIS F 7234. Used to check the flow of the contained liquid through fluoroscopy.
We also offer an tempered glass material.

COMPANY PROFILE


Company name Mizuno Strainer Industries co.,ltd.
Address 5-41,Zaimoku-cho.Yamatotakada-city.Nara 635-6005.Japan
Tel +81-745-52-0581
Fax +81-745-22-6005
ISO証書(2008年版)
ISO証書 (2008年版)
※クリックで拡大します
JIS証書
JIS証書
※クリックで拡大します